Coupelx Posted August 18, 2007 Report Posted August 18, 2007 I got a pair of almost new skat trak 6 paddle gliders off a blaster for nearly free and would like to run them since i have them. I normally run maxxis razrs and want to use the paddles for primarily drag racing. They arent the best for a banshee but o well. Gearing is 13/40 (stock) right now and i was thinking of a 15t sprocket for the motor or do i need to go with a 16? I need something that will be a good median between the 2 sets of tires. Mods: Trinity aluminum head (21cc domes) trinity pipes trinity keihn carbs vforce reeds k&n filter plans call for an adjustible timing plate too. Quote
shee rips Posted August 18, 2007 Report Posted August 18, 2007 first off stock garing is 14/41, and yea you would be fine with a 15 tooth on the front, but i wouldnt go any bigger than that :thumbsup: Quote
ohiobanshee Posted August 18, 2007 Report Posted August 18, 2007 The older banshees 87,88 had 13,40 gearing on a 4bolt rear hub. Quote
shee rips Posted August 18, 2007 Report Posted August 18, 2007 The older banshees 87,88 had 13,40 gearing on a 4bolt rear hub. my bad Quote
Coupelx Posted August 18, 2007 Author Report Posted August 18, 2007 My drive sprocket is a 13. it is a 2001. back is either a 40 or a 41. i will check on the tire sizes. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.