another 2-1 jetting

[ironhead]

ok here are my mods jetting wise,

- 4 mill long rod

- dune port

- trinty 2-1,35 pwk,running air box

- v-force 3

- noss head 20 cc

- t 5s

- + 4 timming

 

im just fininshing the build and want to know a good staring point , any help would be great thanks !

[Snopczynski]

EEK or dek needle in middle clip position. 190 main jet. 48 pilot jet, 2 turns out on the air screw.

[ironhead]

the needle that came with it, is a GEK do u think it will work ? i think its a leaner needle . I was going to start with a 210 main and a 52 pilot , will that be to rich , im about 800 ft above sea

[Snopczynski]

As far as I know you cant have a gek, cause they dont exist. Are you sure its not an egk?

 

That main and pilot sounds too big. My friends ass ripping 4 mill runs a 205 main, dek needle, and 50 pilot jet. I think he is going to be coming down some sizes after I tune it on Labor day.

[ironhead]

sorry it was late when i wrote that , its a dgk. how about a 195 main and 48 pilot with the dgk in the middle ?

[Snopczynski]

Sounds good for a start point to me.

[ironhead]

thanks for your help!!