fastrthnu Posted August 6, 2007 Report Posted August 6, 2007 Im not sure there is any water in it, but I sunk it twice today and filled the pipes and cylinders in a canal and want to see if there is any water in the case. I dont think I got any through the intake, but Im not positive. I got it running, but it has a funny "raspy" noise on the high end now. Quote
_Hex* Posted August 6, 2007 Report Posted August 6, 2007 Im not sure there is any water in it, but I sunk it twice today and filled the pipes and cylinders in a canal and want to see if there is any water in the case. I dont think I got any through the intake, but Im not positive. I got it running, but it has a funny "raspy" noise on the high end now. well it might be a broken reed or something. the only way i know of without taking the motor completely apart is taking the cylinders off and flipping the bike. we did this to a bike that had sand in the crank and the guy was too broke to open the motor up. what u can also do while its turned over is get a squirt bottle with premixed gas and slowly turn over the crank to wash out anything inside like dirt. Quote
shee rips Posted August 10, 2007 Report Posted August 10, 2007 if the water was CLEAN i wouldn worry about it just let it run through, but if it was muddy i would probably tear it down and clean everything. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.