Jump to content

Recommended Posts

Posted

Hey all, got a nice set of cylinders for sell..I just rebuilt this thing 2 weeks ago.. I'm selling these for my little brother.. The cylinders have 1 ride on them and break in.. The tops of the pistons still look new.. Putting out a solid 145lbs of compression at 2,000 feet.. They have over $900 worth of work done to them.. First the cylinders had the big bore sleeves installed then they were sent to CPcustoms for a MX port.. A stock head has been milled and rechambered to accept the huge pistons.. Installed now is a brand new set of 69.5mm PRO-X pistons.. These cylinders put out a huge amount of mid range power and ton's of torque.. There was a problem with the cylinders leaking water into the cylinder and the bike blew up, so before i rebuilt it this time i took them to a local machine shop and had them level'd.. A few holes in the intake/studs have been heli coiled(sp) but hold up fine..As far as life i think these sleeves go to a 72mm bore so there is still alot of life left in them.. The sleeves are still thick!! So with that said....Included is cylinders, pistons, WP bearings, and the custom cut head.. BOLT ON AND RUN!! $450 Shipped OBO.. This may turn out to be a complete part out but as of now this is first up.. Any questions pm me or give me a call at 1-931-787-4022

 

Thanks, Jeremy

Posted (edited)

There actually on the bike now wallace.. They are as described though..I'm leaving for vacation on tuesday or i'd get some pics for you.. I was actually going to sell them before i leave, and have my little brother ship them out as they are his and i just got a ton of stuff going on..

Edited by Lethaface
Posted

you have pm...

There actually on the bike now wallace.. They are as described though..I'm leaving for vacation on tuesday or i'd get some pics for you.. I was actually going to sell them before i leave, and have my little brother ship them out as they are his and i just got a ton of stuff going on..

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...