milo_32000 Posted June 15, 2007 Report Posted June 15, 2007 Cleaned carbs, I did`t touch any settings, NOTHING, now it won`t idle, but revs great, what is wrong ? Thanks Milo_32000 Quote
fastrthnu Posted June 15, 2007 Report Posted June 15, 2007 Cleaned carbs, I did`t touch any settings, NOTHING, now it won`t idle, but revs great, what is wrong ? Thanks Milo_32000 choke tube connected? Quote
milo_32000 Posted June 16, 2007 Author Report Posted June 16, 2007 Choke tube is in place, this thing is driving me crazy, if I had had everything out of carbs I may have a clue, Thanks, Milo_32000 Quote
milo_32000 Posted June 16, 2007 Author Report Posted June 16, 2007 Slide Adj. ??? Left slide is out of adj, how do I adj slides, left is higher, Thanks, Milo_32000 Quote
Crazy at 53 banshee rider Posted June 16, 2007 Report Posted June 16, 2007 Check pilots jets! A very small piece of dirt or sand really messes them up. On the stock carbs there is a small hole drilled in the side of the slides and on the carbs toward the top of the slide body you can see a small sight glass. It is on the right side and back slightly. When you open the throttle you can see the slides move up, the holes on the slides should match on both carbs in the sight glass. If not you need to adjust them to match. Hope that helps. :cool: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.