2003LimitedBanshee Posted June 7, 2007 Report Posted June 7, 2007 Hey all, I've got some stuff kicking around that I need to get rid of because I am never going to use it. So here goes: - Stock Reed Cages with Boyesen Power Reeds w/stops removed. $35 shipped - Stock Head (no shaving, pitts etc.) $40 shipped -CFM Swingarm: Powdercoated in silvervein, +4 length, stock carrier. Never used, still in box it was shipped to me in. FYI, the shock cross shaft appears to be slightly out of parallel with the front mount tube. Probably won't affect suspension action or impact otherwise, but so you are aware. Asking $120 shipped. - Some other assorted stock parts as well, ask if you don't see it. Oh yeah 450 kits and spacers too... :biggrin: Quote
bigdaddy69 Posted June 7, 2007 Report Posted June 7, 2007 I'm intrested in the swinger, how about some pics? Quote
WALLACE84 Posted June 7, 2007 Report Posted June 7, 2007 Will you sell just the 450 shocks cut for a shee? Thanks -Dan Quote
2003LimitedBanshee Posted June 7, 2007 Author Report Posted June 7, 2007 I'm intrested in the swinger, how about some pics? No problem, give me until tomorrow evening and I promise I'll have some pics up. Wallace - I don't have any extra 450 shocks at the moment, and I have a few interested parties that I am looking for already. However, 450 shocks cut for the Banshee? Are you talking about already modded to fit the stock Banshee a-arms? In that case, it's usually just a small amount of grinder work on the lower a-arm mount and a little on the lower shock body, plus a gentle reshape of the upper frame mount. Quote
okbeast Posted June 7, 2007 Report Posted June 7, 2007 I'm also interested in the swinger but was lookin for a roundhouse. Did you get the CFM off ebay? I thought they had a page but I couldnt find it the other day. Quote
2003LimitedBanshee Posted June 13, 2007 Author Report Posted June 13, 2007 Sorry for the delay guys, I got stuck working extra days and just flat ran short on time. But, as promised, here are a few pictures of the CFM Swingarm. Again, asking $120 shipped. Thanks... This is the cross-shaft outage I was talking about, again doesn't look like it should affect anything other than aesthetics. Quote
greg_banshee Posted June 14, 2007 Report Posted June 14, 2007 would you ship head to Canada ? b0k2a0 Nova Scotia, Canada ? if so how much more would it be ? & can i get some pics of it ! Quote
2003LimitedBanshee Posted June 14, 2007 Author Report Posted June 14, 2007 would you ship head to Canada ? b0k2a0 Nova Scotia, Canada ? if so how much more would it be ? & can i get some pics of it ! I could definitely ship to Canada, in fact the CFM swingarm is SOLD and will be going out to Canada as well. I will calculate shipping to you this evening and snap some pics for you as well. Check back later for a few pics and I'll PM you a shipping quote. Thanks ToomeySheeLE on the swingarm, it will be going out to you tomorrow! Quote
2003LimitedBanshee Posted June 14, 2007 Author Report Posted June 14, 2007 As requested, here are a few pics of the head. The third image shows the only "defect" in the head. There is a tiny pit (see pin tip reference) in the 1 o'clock position of the right side cylinder (as seated on the bike). It was there when I pulled it off, so it very well may have been there from the factory. :shrug: greg_banshee, I'm working on getting you a USPS quote now... you'll have a PM this evening for actual shipping cost. Quote
2003LimitedBanshee Posted June 14, 2007 Author Report Posted June 14, 2007 I almost forgot, I also have a set of stock Banshee front shocks off my '03 limited (yellow springs) with black shockwears. $80 shipped. Also, two sets of stock pipes and stingers, one set of stock silencers. Make offers (a few $ + shipping?) Thanks again! -Brian Quote
greg_banshee Posted June 14, 2007 Report Posted June 14, 2007 (edited) head looks Brand-new ! thats an un-shaved head right ? & there are no gouges across where the head gasket seals is there ? (doesn't seem to be in the pics) but just thought i'd ask its 12:30 here & i gota work at 7:30 so pm me a quote & i'll get back to you t/m thanks a lot for the quick reply ! Edited June 14, 2007 by greg_banshee Quote
2003LimitedBanshee Posted June 14, 2007 Author Report Posted June 14, 2007 head looks Brand-new ! thats an un-shaved head right ? & there are no gouges across where the head gasket seals is there ? (doesn't seem to be in the pics) but just thought i'd ask its 12:30 here & i gota work at 7:30 so pm me a quote & i'll get back to you t/m thanks a lot for the quick reply ! Thanks, I try to keep my stuff in pretty good condition and it's been removed for over a year when I put the NOSS on, just collecting dust. Yes the head is unshaved, gasket surface unmarked. You shipping quote is still coming, but it shouldn't be bad. The swingarm was just over $30 going express USPS and it weighs 14lbs. Thanks! Quote
greg_banshee Posted June 15, 2007 Report Posted June 15, 2007 hey whats your Paypal account name ? i want the ehad 50USD sounds great to me ! pm me Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.