Jump to content

Recommended Posts

Posted

Detonating in the left cylinder/ choke cylinder, i recently cleaned the carbs. seems like choke is stuck on, what should i be looking for? not to good with these carbs. i relize there is a choke jet in the float bowl and a tube that connects them. did i put something back together wrong? did i loose something?

Posted

You might be pinging from high comp with not enough octane, or too much timing, I have never seen a bike detonate and the motor live much longer than about 5 seconds after that. More than likely if it didn't do it before, and it did it after you worked on it, then you did something wrong.

Posted (edited)

I think i figured it out, compression and octane are alright. im pretty sure its the new stator i just put on, i did a bunch of work, including CDI, eliminating the TORS & Lights. the timing was not advanced, but the stator i got was from RM stator and its a piece of shit, cast aluminium bullshit. i will never buy any thing from RM stator again, they didnt even send me the free xenon bulbs. so i wouldnt recomend RM Stator to anyone. The cast was so weak that i snapped the adjusting ear off, and then stripped the pick up coil mounts by just barely tightening it.

 

Oh yea and the manifold gasket are fine i checked them.

Edited by thesheerider
Posted (edited)

I have a rs 200w stator and flywheel, so do 4 other guys I ride with. Never had a problem with them that I didn't cause myself. Why did you have the pickup screws out? I think Ricky's stuff works great. A lot of the complaints about his stuff I see on here are from people who dont know hot to diagnose electrical issues, or they broke the parts themselves not installing them right.

Edited by Snopczynski

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...