96_banshee_96 Posted June 3, 2007 Report Posted June 3, 2007 (edited) I got my 87 shee put back together and I need to know where I should position the needle clip. FMF fattys Bored .040 Stock carbs K&N filter with the whole box cut off so its just a open 2 into 1 K&N filter 300 main 27.5 pilot I believe that the needles in the carbs are stock because there are only 5 groves on them. It has 5N7 marked on the needle. Im from michigan im not sure on the elivation (sp?). I was hopeing someone from michigan could chime in on this one. Edited June 3, 2007 by 96_banshee_96 Quote
Crazy at 53 banshee rider Posted June 3, 2007 Report Posted June 3, 2007 My neighbor has that same setup pretty much and with the clip in the forth position just off idle there was a slight bog. We moved it to the middle groove and it cleaned up a lot. Give that a try and see what you come up with. I also think that the air screws are one turn out. :cool: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.