Looking for Owner!

[FireHead]

Look the same to me, except Ricky puts a crossbar on his mounts so when you adjust the lights they both point out at the same height.

I was looking at the u shaped pieces of metal the lights mount on. Jay's do not look the same as the RS units.......................ought to stop talking though, as I don't know much about these products. :geek:

[Bansh88]

Please don't try and bolt these lights up with a stock stator. I rode with a dude last summer who had a big set of PIAAs on a stock stator. He swore they were fuckin awesome. They spat out a dingy yellow glow. That was it. Pretty patheitc.

 

Bigger lights like that should have some kind of crossbeam or frame.

[KaosBanshee44]

Yeah i knew if i wanted to upgrade the lights i would have to go with a bigger stator. another thing is the stock lights on the bike now don't match the plug on the bike. I don't wanna hard wire it either and just rig it up.

[The Faster Cracker]

so you can't run the PIAA light kit that you can get from yamaha wiht the stock stator? am i reading this right?

[Snopczynski]

OK, we will make this easy Stock stator= 70watts of lighting combined between both your lights. If you have two lights and each one is more than 35w, the stock stator cannot handle it.

[EastCoast Banshee]

so you can't run the PIAA light kit that you can get from yamaha wiht the stock stator? am i reading this right?

 

Those lights aren't the same PIAAs that RS sells. My guess is that those are 35w a piece. But they do make 35w bulbs for the lights i previously posted so you could always go that rout if you just wanted bigger lights.

 

http://www.rickystator.com/catalog/product...;products_id=75

Edited June 6, 2007 by EastCoast Banshee