Jump to content

Recommended Posts

Posted

Ok, I have had this banshee for a couple of years and I lend it out and get it back with these problems. Saw some oil leaking from the left side cylinder head, backfires a little, and I can rev it to 5000rpms or so and it has no torque. Had trouble starting it, took off the air filters sprayed either and it still took a few kicks to get going. With the lack of power I get about 10 feet before it goes no more and dies. I have no clue, checked spark, and checked compression both seems to be ok. Any help would be appreciated.

 

Josh

Posted
Ok, I have had this banshee for a couple of years and I lend it out and get it back with these problems. Saw some oil leaking from the left side cylinder head, backfires a little, and I can rev it to 5000rpms or so and it has no torque. Had trouble starting it, took off the air filters sprayed either and it still took a few kicks to get going. With the lack of power I get about 10 feet before it goes no more and dies. I have no clue, checked spark, and checked compression both seems to be ok. Any help would be appreciated.

 

Josh

 

oil leaking from the head? are you sure? where exactly?

Posted

It looked like it was around the left spark plug. I figured it just wasn't tight enough, I was really more concerned with the lack of power.

 

Thanks for replying, and I look foward to more.

Josh

Posted

Do you still have the TORS hooked up? If so unplug that, same goes for the parking break. Make sure the tube is connected between the two carbs as well.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...