what carbs do i have?

[qboronyrican]

ok i got ya.....thanks for the info

[FireHead]

also the person i bought the bike said it has a idle kit and from what ive been reading thats for a twist throtle but i don't have this i have a thumb throtlle and was wondering if this is a problem

An idle kit probably is a TORS eliminator kit in your case. :geek:

[qboronyrican]

ohh ok figured as much....thanks

[qboronyrican]

nope ....thanks thats what i figured but just wanted to make sure.....so far i got t5 pipes, adjustable timing plate +4, hi flo impleller, 13 and 40 sprockets, k&n air filter with outerwears and no air box, tors eliminated, boost bottle, and larger tires all around....think thats it....intenally i don't know

 

 

so what jets should i be using for this setup???? and what about this dial a jet or power jet ive been reading about????

Edited April 28, 2007 by qboronyrican

[fastrthnu]

so what jets should i be using for this setup???? and what about this dial a jet or power jet ive been reading about????

 

what are your general temps and elevation?

[qboronyrican]

OH YEA FORGOT THAT PART......SLIGHTLY ABOVE SEA LEVEL 220-700 FT DEPENDING ON WHERE I RIDE THAT DAY AND AROUND 75-85 DEGREES IN SUMMER AND AROUND 30-40 IN WINTER.....WONT RIDE BELOW THAT....I HATE THE COLD

[qboronyrican]

OH YEA FORGOT THAT PART......SLIGHTLY ABOVE SEA LEVEL 220-700 FT DEPENDING ON WHERE I RIDE THAT DAY AND AROUND 75-85 DEGREES IN SUMMER AND AROUND 30-40 IN WINTER.....WONT RIDE BELOW THAT....I HATE THE COLD

 

 

 

so far i got t5 pipes, adjustable timing plate +4, hi flo impleller, 13 and 40 sprockets, k&n air filter with outerwears and no air box cover, tors eliminated, boost bottle, and larger tires all around....think thats it....intenally i don't know

 

 

so what jets should i need or start with??????

[fastrthnu]

so far i got t5 pipes, adjustable timing plate +4, hi flo impleller, 13 and 40 sprockets, k&n air filter with outerwears and no air box cover, tors eliminated, boost bottle, and larger tires all around....think thats it....intenally i don't know

so what jets should i need or start with??????

 

25/300 Do a plug chop right away. might need to move up or down a main.