jet mech Posted March 16, 2007 Report Posted March 16, 2007 ok got a stock motor trinity stage iv pipes k&n no lid and if I cruise just below the powerban it sputters i am guessing its around 1/4 to 3/8 throttle jetting is 300 main, 27.5 pilot, 4th clip something to worry about or just freakn' floor it and steer Quote
FASTOYS Posted March 16, 2007 Report Posted March 16, 2007 ok got a stock motor trinity stage iv pipes k&n no lid and if I cruise just below the powerban it sputters i am guessing its around 1/4 to 3/8 throttle jetting is 300 main, 27.5 pilot, 4th clip something to worry about or just freakn' floor it and steer Jet mech, drop your needle down one (raise the clip) and see if that helps! Where are your air screws at as they may need to come out lil too? Quote
jet mech Posted March 16, 2007 Author Report Posted March 16, 2007 air screws are 1.5 turns out, you think it is running rich huh thanks Quote
FASTOYS Posted March 16, 2007 Report Posted March 16, 2007 I believe so, might need 2 turns on the air screw but try the other first. Quote
NEVER SATISFIED Posted March 16, 2007 Report Posted March 16, 2007 what do your plugs look like.. rich or lean? Quote
Banchetta Posted March 17, 2007 Report Posted March 17, 2007 I agree. Sputtering is a sign of richness..at 1/4 throttle, its most likely the needles...drop them to the 3rd clip and try it out... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.