rrr Posted January 29, 2007 Report Posted January 29, 2007 I have a lot of parts that needs to go. Most of them are stock parts comming from a 2003 banshee. Need to get some space and money to complete my rz banshee project, stuff as to go. All prices are without shipping. If you want something, just pm me with what you want and your addres and I will send you pics and a shipping price. - 1 race cut yellow front fender 40$ - 1 gas tank with the valve and cap 30$ - 1 rear shock white spring 50$ - 1 rear shock linkage 20$ - 1 complete wiring harness with CDI, coil pack, voltage regulator without TORS crap (2000) 150$ - 2 headlight covers (yellow and red) looks like two eyes 10$ - 2 rear hubs 20$ - 2 Cylinders ported by RG would need to be resleeved, awsome porting 150$ - 1 clutch basket and pressure plate as some groove in the basket 30$ - 2 boots for profoam filters plastic 10$ each - 1 rear caliper 20$ - 2 front shocks white 80$ - 2 stock foot pegs 20$ - 1 brake pedal 10$ - 1 rear brake fluid reservoir with cap 5$ - 2 stock tie rods 10$ - 2 front calipers 40$ - 2 upper tabs painted red 40$ - 2 front disk protectors 15$ - 1 front brake line the metal part going around the rad 20$ - 1 front brake lever 20$ - 1 stock skid plate 10$ - 1 rear carrier bering and seal need to be replaced 15$ - 1 rear disk hub and disk 15$ - 1 rear sprocket hub 10$ - 1 stock front bumper mint black 20$ - 1 swing arm stock I think it's bended but not sure 10$ - 1 stock handle bar 15$ - 1 set of cases rod broke and hitted the front of the case on the magneto side I think they could be repared but not sure Make offer - 1 stock tranny was going perfect but the sprocket nut was welded on the output shaft so I had to grind it, Would need an output shaft, gears were shifting well make offer - 1 drag ported motor was on a trail bike, every seal and gasket was replaced during rebuild, topend at p1 (wiseco pro lite), as rolled maybe 20 hours since new topend, head was leaking replaced for a straight one, front end was lifting in 3rd gear, porting looks rough but is pulling hard 800$ - 1 33 mm keihin carb was run on alcool with trinity 2 in 1 setup would need new seal and new pin Make offer I am forgetting stuff... Pm me for pics Quote
ClimbAnyHill Posted January 30, 2007 Report Posted January 30, 2007 Dibs on this stuff, PM Sent. - 1 rear disk hub and disk 15$ - 1 rear sprocket hub 10$ - 1 stock front bumper mint black 20$ Quote
Canadarider Posted January 30, 2007 Report Posted January 30, 2007 Dibs on this stuff, PM Sent. 1 rear caliper 20$ 1 rear brake fluid reservoir with cap 5$ 2 stock foot pegs 20$ Quote
rrr Posted January 30, 2007 Author Report Posted January 30, 2007 I will take pictures and answer PMs tomorrow. :thumbsup: Thanks Quote
rrr Posted January 31, 2007 Author Report Posted January 31, 2007 Pm or email sent back to everybody Quote
rrr Posted February 2, 2007 Author Report Posted February 2, 2007 Pegs, rear brake fluid reservoir, hubs, brake hubs, caliper, sprocket hub and motor are sold Forgot to say that prices are in US dollars I don't know how to edit but the clutch basket I have listed is missing a stud holding it to the gear, so it's pretty srap, if somebody wants it pm me an offer Pm answered Quote
ClimbAnyHill Posted February 2, 2007 Report Posted February 2, 2007 Dibs on this stuff, PM Sent.- 1 rear disk hub and disk 15$ - 1 rear sprocket hub 10$ - 1 stock front bumper mint black 20$ bump for some good parts. Quote
Canadarider Posted February 5, 2007 Report Posted February 5, 2007 Bump for a great guy a++ seller parts are in great shape and really happy thanks rrr Quote
rrr Posted February 12, 2007 Author Report Posted February 12, 2007 HumptyBumpy Going on ebay soon Quote
Canadarider Posted February 12, 2007 Report Posted February 12, 2007 Pics of the race cut front fenders plz rrr , email is [email protected] thanks Quote
rrr Posted February 16, 2007 Author Report Posted February 16, 2007 Pics of the race cut front fenders plz rrr , email is [email protected] thanks Pic have bin sent. thanks And the clutch is good for the garbage! Not for sale anymore! Quote
May Posted February 16, 2007 Report Posted February 16, 2007 Do you have a flywheel and more hubs just checking Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.