JET 99 Posted January 25, 2007 Report Posted January 25, 2007 didnt see any topics on it (did search)................................. when removing tors i cut out the wires going from the wiring harness to the switches on the carbs.... cleaned up the harness alittle. the thumb throttle has a wiring harness for tors infront of cable took that out also along with switch in housing.... now got a hole in housing?????????????? well they make the little rubber grommet (with outta hole) out of aluminum for 35.00 f-that got to thinking..................... black rtv silicone might work well 3.75 later and a small tube 6 hour cure time before i pulled it off of the hard clear plastic wrap of tube package..... presto i now have no hole in the flexable rubber grommet and dont look really noticable unless i point it out to someone......... saved 35.00 and probably some on shipping... sealed up throttle housing ....no dirt gonna get in,no ugly wiring coming out, seems to be a good fix :beer: Quote
2strokeBear Posted January 25, 2007 Report Posted January 25, 2007 Good timing with this thread. I just got my tors eliminator kit in the mail today. I will be using that tip tomorow. thx Quote
dajogejr Posted January 25, 2007 Report Posted January 25, 2007 Actually, you can get a polished aluminium plug for 19.95 plus shipping, but...you're correct!! You can get the plug for the water pump housing for the same, both at cascadeinnovations.net Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.