tyguy Posted November 30, 2006 Report Posted November 30, 2006 does anyone know what the stock setting for the needle jet is. i amagine thats the screw that is really tiny and adjusts your low end, im trying to get mine back to stock.. its all jacked up.. thanks Quote
Bansh-eman Posted November 30, 2006 Report Posted November 30, 2006 does anyone know what the stock setting for the needle jet is. i amagine thats the screw that is really tiny and adjusts your low end, im trying to get mine back to stock.. its all jacked up.. thanks what carbs you running ? your needle jet has no screw... its the middle clip stock but i cant remember off the top of my head what the stock needle is... if your talking about the air screw the dealer ships normally change them along with other jets if needed to run at the altitude they are selling them at... Quote
tyguy Posted November 30, 2006 Author Report Posted November 30, 2006 (edited) alright thanks, its the little screw in the back of the carbs, (stockers) not the idle screws on the side but the little brass ones. i knew youd answer it some time , air pilot jet is that right, im looking up exploded views of it Edited November 30, 2006 by tyguy Quote
Bansh-eman Posted November 30, 2006 Report Posted November 30, 2006 if your talking about the small brass ones by the bell where the filter bolts on thats your air screw... Quote
tyguy Posted November 30, 2006 Author Report Posted November 30, 2006 oh ok, i got those two screws mixed up, wouldyou know the stoock specs for those? Quote
Bansh-eman Posted November 30, 2006 Report Posted November 30, 2006 specs as in? search sudco and check out their site u can find most any question of keihin carbs on there... or if your running stockers search mikuni sp? and they have the same. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.