bansheeryder_69 Posted November 30, 2006 Report Posted November 30, 2006 alright I need to replace my needles and seats and I have the parts but no idea how or where they go or even how to take down the carbeurator past the bowls. Any info would be helpfull thanks. DILLON Quote
Banshee4Drag Posted November 30, 2006 Report Posted November 30, 2006 Ummm well lol been ahwile since i have...take the carbs off. take the hole slide look at the top of it...should be two small philleps headd screw's in there un screw them and the cable and a little gold looking peice and the screw's all come out....from there the needles pull right out..If i remember correctly..someone else with stock carbs would help more Quote
dajogejr Posted November 30, 2006 Report Posted November 30, 2006 Do one at a time, and note/label which slide came out of which carb. Compress the springs all the way with your fingers, then push the cable into the slide...and tip the slide upside down while shaking it a little. A brass insert will fall out, that holds the cable in place. Then, jiggle the cable, it'll come out. Next inside the slide, remove the two small phillips. The spring is the trickiest part. Once you do that say...oh, a million times, it becomes very easy... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.