banshee freak Posted November 19, 2006 Report Posted November 19, 2006 hey guys hope you guys can help me out....i bought a toggle switch to convert my lights over...its a 2 position switch....now i took my stock switch apart and there is 5 wires....i seen the electrical diagram but they only show 4 wires.....ok so i got the yellow wire with the red stripe which is for the regulator...blue wire for the taillights.....solid yellow for high beams.......green for low beams...but i also have a red wire!!!! lol can anyone tell me which wires to put together so i can run them on a switch??? thanks alot guys Quote
bansheefreak Posted November 19, 2006 Report Posted November 19, 2006 is the red wire your main power feed??? if so run it to the swith them run the highbeems to the other side of the switch should work that way... all you really need to do it figure out the main power wire then connect it to the highbeams wire... Quote
banshee freak Posted November 19, 2006 Author Report Posted November 19, 2006 what I want to do is run my low beams but i cant just find the main power....i alos have a regulator that has to be connected in there......so i aint sure if the red wire is power which is not really hard to find out but i still gotta know which wires to connect on which side Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.