idle/running problem

[wooten]

ok i unplugged all the tors stuff a few months ago and this week i decided to cut all the plugs and wires out of the harness and take the black box off i cutthe wires coming from the carbs, the one wire from the throttle a black wire, and the one from the clutch side and i also cut the green and yellow wire that runs tothe back and all plug ins that went to the tors shit and now i cant start it unless i pour a little gas in to the carbs and it will only run for a min, or two and quits and will not start back what is this did i cut something i didnt need to or what also can some one please give me a pic of where the wires in the back plug in the yellow and blu wire. its a 02 model

[wooten]

anyone ?????

[okbeast]

Judging by how it'll start when you pour gas in the carb but then dies, sounds like you're not getting fuel, not trying to be a smartass but are you sure the gas is on?

[Satsol67]

Download the service manual thats on the sticky it has the wiring diagram.

 

 

Hope that helps

[wooten]

yes the gas is on and i will try to find the wiring diagram on here thanks, still open for ideas though !!!

[wooten]

do the wires have to stay on the carbs even though they are not pugged in????

[wooten]

ok let me see if i got this right you leave the wires from the throttle unplugged,the black box unplugge, and the wores from the carb unplugged, i had this damn thing running and took the wireand cut them off the harness and would not idle but before i cut them it did ran and idled great but i cut the wires at the carbs and left them cut so will that make a difference i need help asap this thing is really getting on my nerves