Fre530d Posted November 10, 2006 Report Share Posted November 10, 2006 Hello Guys, I have a banshee at sealevel. Stock pipes, Noss coolhead w 20cc domes, lid off and now bought some POD filters. I now have a 240 main jet, air screw 0.5 turns out, needle on 4th position from the top. Will the main be big enough or do I have to put in a 260 or something because with the lid off I went from 200 to 240 and I had to turn the airscrew in to 0.5 turn out? Thx for all answers in advance :beer: GRTZ Fred Quote Link to comment Share on other sites More sharing options...
okbeast Posted November 10, 2006 Report Share Posted November 10, 2006 You may need to go up a little on the main, but since you still have stock pipes you're not really able to push more air through, just pull more in. You're really killin your performance with the stock pipes too. Quote Link to comment Share on other sites More sharing options...
sheefreak Posted November 10, 2006 Report Share Posted November 10, 2006 I would think 240 or 250 would be a good starting point. The fact that you are at .5 turns out on your airscrews indicates you need to go up on pilot size. Quote Link to comment Share on other sites More sharing options...
Fre530d Posted November 11, 2006 Author Report Share Posted November 11, 2006 I will have my trinity pipes soon. Had to sent them back due to fitting problems. Then I put in a 310 main. Thx for all the answers guys :wink: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.