Hollister_Hitman Posted October 23, 2006 Report Posted October 23, 2006 I know this question is asked a lot but I have never done any jetting before. Here is my bike now (see pic). I am just waiting on my upper a-arms from janssen. I just put on a trinity 35mm 2 into 1 carb and I am also installing some dmc 916 exhaust. I also am running a uni filter with no air box lid. Elevatiom is around 1000ft and everything else is stock. I am not exactly sure what size jets are in my carb. I am hoping someone can give me some suggestions so that when I finally get my front end back on I will be close and I can do some plug chops. Thanks for any input Quote
dajogejr Posted October 23, 2006 Report Posted October 23, 2006 I don't know what yer talking bout....I'd leave it as is, learn to balance it....forget about turning. Think how fast that bastard would be with all that lightweight drag frame you got there....ha ha... :laugh: Try a 50 pilot, needle I'm unsure of, and a 190 main. that's probably a little rich on the main, but...it should be safe... Keep in mind, 1 into two carb setups take a larger main than a dual setup... Good luck on those a arms, I've been watching that thread and the BS you've had to deal with....sorry bout that. Quote
Hollister_Hitman Posted October 24, 2006 Author Report Posted October 24, 2006 I don't know what yer talking bout....I'd leave it as is, learn to balance it....forget about turning. Think how fast that bastard would be with all that lightweight drag frame you got there....ha ha... :laugh: Try a 50 pilot, needle I'm unsure of, and a 190 main. that's probably a little rich on the main, but...it should be safe... Keep in mind, 1 into two carb setups take a larger main than a dual setup... Good luck on those a arms, I've been watching that thread and the BS you've had to deal with....sorry bout that. Thanks for answering yet another jetting post. I always see you are answering them. Janssen is supposed to be sending my a-arms out on wednesday (2 weeks to powdercoat them :mad: ) Quote
dajogejr Posted October 24, 2006 Report Posted October 24, 2006 Thanks for answering yet another jetting post. I always see you are answering them. Janssen is supposed to be sending my a-arms out on wednesday (2 weeks to powdercoat them :mad: ) What can I say...I'm bored at work...lol... Sorry to say, I won't be on the HQ Thursday through Sunday....got a long weekend dune riding trip, last one of the year with a bunch of buddies.... Sure will be nice to unplug for a while... To say I'm counting minutes at this point would be an understatement!!! Quote
Hollister_Hitman Posted October 24, 2006 Author Report Posted October 24, 2006 What can I say...I'm bored at work...lol... Sorry to say, I won't be on the HQ Thursday through Sunday....got a long weekend dune riding trip, last one of the year with a bunch of buddies.... Sure will be nice to unplug for a while... To say I'm counting minutes at this point would be an understatement!!! Yeah I really need to go riding, it has been almost 3 weeks. I usually go at least once a week. My bike was all stock except for tires rims and nerf. I can't wait to try out all the shit I just bought for it. Good luck on your ride and thanks again for your help :beer: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.