BaNsHeeJuNkEy Posted September 25, 2006 Report Posted September 25, 2006 Ok i just took my hole shee apart today. i am going to sand blast the hole thing and clean it up i know there are some mounts that i can get rid of. but not sure what one they all are. i know the brake line ones i can but there is a bunch all over the bike taht i haev no clue what they are for. like under the seat i have 2 brakets one on each side and have a peace of metal sticking out with ribber on them and they are not doing anything. can someone help me out on what one to get rid of. aslo once i got the hole bike striped i saw that the back of the bike has a broken peace wear the two parts of the computer were. and it looks a little twisted. and my right foot peg the rear bolt on it to teh frame is rotted/rippped right out. am i better off fixing this or gettign a new frame. and if so anyone have one for sell close ot mass and cheap. i have a 03 shee. Quote
~DunerGal~ Posted September 25, 2006 Report Posted September 25, 2006 Ok i just took my hole shee apart today. i am going to sand blast the hole thing and clean it up i know there are some mounts that i can get rid of. but not sure what one they all are. i know the brake line ones i can but there is a bunch all over the bike taht i haev no clue what they are for. like under the seat i have 2 brakets one on each side and have a peace of metal sticking out with ribber on them and they are not doing anything. can someone help me out on what one to get rid of. aslo once i got the hole bike striped i saw that the back of the bike has a broken peace wear the two parts of the computer were. and it looks a little twisted. and my right foot peg the rear bolt on it to teh frame is rotted/rippped right out. am i better off fixing this or gettign a new frame. and if so anyone have one for sell close ot mass and cheap. i have a 03 shee. Air box mounts. Quote
BaNsHeeJuNkEy Posted September 25, 2006 Author Report Posted September 25, 2006 Air box mounts. ok kool then they are going since i have a different air box. anything elsa i can cut off on this thing i want to make it light as posable. also i have a question does it matter if i shortn all the wires on the shee and put everything more so to the front of the bike. that was there is less wires. adn can i do the same for teh over flow bottle. or does the over flow not able to be below the radiator. Quote
BigRed350x Posted September 25, 2006 Report Posted September 25, 2006 So a search, I just posted a LOT of pictures of a frame I just finished stripping of mounts. LOTS of pictures. I can give you more pics if you need as well. Quote
BaNsHeeJuNkEy Posted September 25, 2006 Author Report Posted September 25, 2006 So a search, I just posted a LOT of pictures of a frame I just finished stripping of mounts. LOTS of pictures. I can give you more pics if you need as well. you say you have pics. please if you would send me them i started cuttign away already at the front. i need to get this thing in tip top shape. so i can go ride again. also is there a speacil tool needed for the from steariong steam. u pulled the steam out becaus eit needs new bearings or something because it would pull in and out. but i don't know how to get the bearing that is in the out. Quote
Big Blue Posted September 25, 2006 Report Posted September 25, 2006 I just used a piece of straing bar that is the same diameter as the inside of the nut to get it out. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.