okbeast Posted September 14, 2006 Report Posted September 14, 2006 Is there a seal where the shifter shaft goes into the motor on the flywheel side? Mine is slowly leaking out oil. Quote
Bill Posted September 14, 2006 Report Posted September 14, 2006 Time for A new seal,you can do it without spiting the cases. Quote
okbeast Posted September 14, 2006 Author Report Posted September 14, 2006 Sweet, I was hoping I wouldn't have to split the case. Quote
okbeast Posted September 16, 2006 Author Report Posted September 16, 2006 Ordered the seal today...any tips on getting the old one out? Quote
Bill Posted September 16, 2006 Report Posted September 16, 2006 VERY CAREFULLY with A small flathead that is sharpened,or A small enough chisle and A hammer and lightly puncher it and pry it out.Works well but you do not want to gouge the case,if you do the seal will never seal. Quote
Big Blue Posted September 16, 2006 Report Posted September 16, 2006 A small curled pick works well, I forget what they are called though. Quote
woodro77 Posted September 16, 2006 Report Posted September 16, 2006 screw a screw into it and pull it out with plyers Quote
okbeast Posted September 16, 2006 Author Report Posted September 16, 2006 I've got one of those little curled pick things. Thanks! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.