JTRIDR Posted September 8, 2006 Report Posted September 8, 2006 Hey all, new to the site here, I have been reading the forums for a while, but just now joined. You all have an excellent site, I have learned alot just from reading what others have posted. I bought a 99 banshee which is pratically stock except for T5's and V-Force reeds about a year ago. When I first brought it home I ripped around on it a little and then it got stuck in 5th and 6th gear. I tore it all apart and replaced the shift forks (Shift forks looked like they were bent very slightly), and everything worked fine. Well not to long ago the same thing happened, and now I am wondering what it could be. I just split the cases today but did not get a chance to take a good look at anything. Was wondering if anyone had a suggestions as to what could be causing this. I hardly get a chance to ride the thing maybe once a month if I am lucky so its not abused or ridden that hard. Any help would be appreciated. Thanks Matt Quote
jlsparky7 Posted September 8, 2006 Report Posted September 8, 2006 Do the gears look ok? The clutch isnt overtightened is it? What kinda oil u running? Quote
JTRIDR Posted September 8, 2006 Author Report Posted September 8, 2006 All the gears look ok, nothing bad there. As far as the clutch, it was not overtightened. I believe when everything was put back together it was all torqued to the correct specs. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.