methyman Posted August 7, 2006 Report Posted August 7, 2006 (edited) Last year I was running my TRX250R 370cc motor against a Banshee with stock .080 over cylinder with +4 mm crank. I was wipping his but for months. He was like a good second slower than my R. I was running best time of 7.47 and he was running 8.80 .He finally gets a cub cylinder and runs right with me. Then some tunning gets quicker by 3 tenths last year Dec. Im happy for him. Get rid of the drag R and build a banshee in May. The guys sons been riding it the whole time, hes a big boy for his age. The kid is 16 yrs old rides alright. The kid starts to talk smack about wipping my bike before I start working on it. I have it running and she runs really good. Yesterday the kid starts talking major crap about wipping me. So talk to his dad yesterday and set up a street race for earlier today. To be honest it wasnt a race at all. I left that 4mm cub at the starting line he was a sleep. The sencond time same out come. I launched on him badly. The only time that 4mm was close to my 10mm was at the starting line. I hate when people talk crap behind your back. I told the kid after the race to shut his mouth because he lost twice. We will meet at the track this Friday night at the drag strip. OLD BIKE NEW BIKE ++++++++++++++++++++++ Edited August 7, 2006 by methyman Quote
wesw Posted August 7, 2006 Report Posted August 7, 2006 The only time that 4mm was close to my 10mm was at the starting line. I hate when people talk crap behind your back so your bragging that you have a 10mm that beat a 4mm. hmm ok terrific. honestly it should. yeah shit talkers are annoying but you have a bit more motor not really a lot more motor than he does. Quote
methyman Posted August 7, 2006 Author Report Posted August 7, 2006 so your bragging that you have a 10mm that beat a 4mm. hmm ok terrific. honestly it should. yeah shit talkers are annoying but you have a bit more motor not really a lot more motor than he does. Im not bragging. I got the kid in weight for sure. I need that motor to pull my 265lbs butt down the 1/8 mile. I couldnt believe that they both father and son thought they had a chance. They were beatting on a frineds 10 mm cub by two bike lengths yesterday. I guess they thought they would do my bike the same. The 4mm runs hard. I give him credit for it but they came to me and started it. I was happy to finish it. I never wanted to race the smaller motor at all until last night when I got tired of the trash talking. Quote
[email protected] Posted August 7, 2006 Report Posted August 7, 2006 it must be the outframes :ninja: Quote
2bzy2p Posted August 13, 2006 Report Posted August 13, 2006 ya but ive seen several 4mills run with 10 mills and only get beat by a bike length in 300 feet sooo.. it proves that a race is one pretty much with the holeshot!! and riding skills! Quote
reded Posted August 14, 2006 Report Posted August 14, 2006 ya but ive seen several 4mills run with 10 mills and only get beat by a bike length in 300 feet I've witnessed this myself a few times. :biggrin: Quote
23champ Posted September 6, 2006 Report Posted September 6, 2006 I've seen a certain 4mm out run a 10mm....... :baseball_shifty: Quote
trex banshee Posted September 6, 2006 Report Posted September 6, 2006 and i've seen one of the 4 mils above, either reded or 23champ, (can't remeber which one) run damn good against a 10mm at Grain Valley. Quote
reded Posted September 6, 2006 Report Posted September 6, 2006 Come out to the Effingham drags and you'll witness a 4mil beat up on a few other bikes with more cc's! :biggrin: Quote
trex banshee Posted September 6, 2006 Report Posted September 6, 2006 Come out to the Effingham drags and you'll witness a 4mil beat up on a few other bikes with more cc's! :biggrin: yeah like mine!! :biggrin: haha well if there is a weekend that grain valley isn't racin and you guys are we will try to make it. Quote
lowriderb Posted September 6, 2006 Report Posted September 6, 2006 i posted these up before but here you go.. the 4mm was mine.. http://media.putfile.com/4mm-cub-vs-7-or-10mm-stock-cyl http://media.putfile.com/4mm-cub-vs-10mm-trex http://media.putfile.com/4mm-cub-vs-350-banshee Quote
trex banshee Posted September 6, 2006 Report Posted September 6, 2006 i posted these up before but here you go.. the 4mm was mine.. http://media.putfile.com/4mm-cub-vs-7-or-10mm-stock-cyl http://media.putfile.com/4mm-cub-vs-10mm-trex http://media.putfile.com/4mm-cub-vs-350-banshee the second one doesn't work. Quote
reded Posted September 6, 2006 Report Posted September 6, 2006 yeah like mine!! :biggrin: haha well if there is a weekend that grain valley isn't racin and you guys are we will try to make it. We're racing this weekend. Hope to see ya if you're not busy! Quote
23champ Posted September 7, 2006 Report Posted September 7, 2006 I prolly wont be able to see anybody.....dont think my ol heap's gonna be runnin!!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.