Fireball Posted July 15, 2006 Report Posted July 15, 2006 Motor locked up. I took the top half off and the cylinder looks to be in ok shape. I fill i can get it bored over a little to remove the scratches.I did find metal in my exaust!!!!!!! The connecting rod is locked up on the crank. Havent taken out the crank yet, not real sure how to do it. I could figure it out eventualy but i also figure that i could save a lot of time if some one could give me some tips on how to do it the correct way, with out me taking things off, that i dont need to. When this kinda of mechanical failure happens, what else usualy tears up. Quote
bansheefreak Posted July 15, 2006 Report Posted July 15, 2006 get a clmers manual.. you be fine just follow instructions . banshee motors are simple to split cases and pull crank out.. but i would have a manual to helpyou threw it... Quote
BigRed350x Posted July 15, 2006 Report Posted July 15, 2006 (edited) http://www.bansheehq.com/forums/index.php?...tting+the+cases go through the entire thing, there are pics all the way down to the crank and tranny towards the last page... Edited July 15, 2006 by BigRed350x Quote
Fireball Posted July 15, 2006 Author Report Posted July 15, 2006 Thanks so much. Maybe one day I can return the help. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.