Flip73 Posted June 29, 2006 Report Posted June 29, 2006 Bike ran fine, had stock carbs & TORS hooked up. I added a single carb intake, therfore removing TORS obviously, and now I get no spark. I searched TORS removal and found a lot of info, however some people seem to say the 2 wires that used to come off the top of the carbs need to be spliced together, but most say just leave them hanging though. Would not splicing them make me have no spark? I also removed the connector that went to the thumb throttle, and I disconnected something on the main harness coming out of the CDI where the cable goes along side the air box - there's a connector there with 2 wires coming out, a yellow one and a yellow/red one. I know I disconnected it but can't for the life of me remember what it was. Anyway, it's just hanging there now... Anyway, no spark now...does any of this make sense? What the heck did I do to myself? I Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.