g-rider Posted June 23, 2006 Report Posted June 23, 2006 I just got my banshee put back together and need some advice on where to start my jetting. I have a set of .30 over cylinders with dune port, Coolhead with 20cc domes, +4 timing, T3 pipes, trinity intakes with 35mm PWK carbs running a airbox. Right now the carbs has 160 mains, 48 pilots and DEL Needles on the 4th clip. I did a plug check and my plugs looked OK. My elevation is around 1000 ft. A buddy of mine said he had about the same set up as me but he was running stock carbs and he said he didn't have a problem getting the front end up in the air in about any gear he wanted to, not haveing to clutch just gas it. Isn't the T3's supposed to be a real punchy mid range? I just thought I would ask you alls opinions. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.