going from FMF to CPI

[Samdogmx]

Im switching from FMF fattys to CPI inframes. Do you think I should go up one or two on the mains? or more? I was thinking of going up two & working from there. Unless you guys say otherwise.

 

thanks in advance

[Hilarious]

What size jets do you have in there already when you were running your FMFs?

I had 340's in with my fattys and when I changed the CPIs leaned the pilot and

midrange circuit a little. You may need to raise your needles a bit.

After you change your pipes out, do a plug test before you go out rippin it up with

the CPIs. You outta notice more power everywhere.

:beer:

[Samdogmx]

What size jets do you have in there already when you were running your FMFs?

I had 340's in with my fattys and when I changed the CPIs leaned the pilot and

midrange circuit a little. You may need to raise your needles a bit.

After you change your pipes out, do a plug test before you go out rippin it up with

the CPIs. You outta notice more power everywhere.

:beer:

 

Right now im running 350 mains 27.5 piloits the longer needles on the 3rd clip & about 3/4 turn on the airscrew.

 

 

I just ordered me up some 35mm airstrikers & I'm gona be doing some porting now though, so i'll have to start all over with these carbs.

 

LOL