f4istunna Posted June 13, 2006 Report Posted June 13, 2006 Do i need to get a special puller to remove the flywheel on the banshee motor or is there another way they come off? I know w/ the honda motors i've done screw the right size bolt in and a few taps later they pop right off, this setup is different any info is appreciated thanks Quote
Animalman294 Posted June 13, 2006 Report Posted June 13, 2006 Yes, you need a flywheel puller fo rlike $10 bucks at local shop. Make sure you screw it all the way in otherwise it can strip. Then use an impact gun on the nut and zippo its off. Do not use a jawed puller, because the flywheel cost a lot more than the real puller. :beer: Quote
jankab Posted June 13, 2006 Report Posted June 13, 2006 Yes, you need a flywheel puller fo rlike $10 bucks at local shop. Make sure you screw it all the way in otherwise it can strip. Then use an impact gun on the nut and zippo its off. Do not use a jawed puller, because the flywheel cost a lot more than the real puller. :beer: http://www.vitosperformance.com/atv_parts/...11&cat=0&page=1 Quote
f4istunna Posted June 13, 2006 Author Report Posted June 13, 2006 alright thanks guys didnt know the puller was that cheap. Thanks for the link Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.