MinEsFasteR79 Posted May 17, 2006 Report Posted May 17, 2006 (edited) I bought my used 96 banshee about 2 years ago. recently I decided to tear down and paint the frame and everything. I bought almost new fmf gold series pipes with power core 2 silencers. the guy before me didn't know much about it because he got it in a trade. its bored .60 over and I think its stroked..I'm not sure. it has hot rod, rods in it. I need help with the jetting. I'm not sure what the guy before me did to it but I'm not sure its right. it has mikuni carbs on it. any ideas? maybe its fine the way it is.. im only 16 and new to BHQ so..help me out? Edited May 17, 2006 by MinEsFasteR79 Quote
Hilarious Posted May 18, 2006 Report Posted May 18, 2006 welcome to the HQ. When I ran my fattys w/ v-force3 reed cages, K&N with lid off air box, stock carbs and stock porting, I had 340 mains, needles middle position, 27.5 pilots and 1.5 turns out on the air screws. This is @ sea level tho. A port job will take bigger main jets, im sure. What kind of air filter assy do you have? Quote
MinEsFasteR79 Posted May 18, 2006 Author Report Posted May 18, 2006 I have a stock air filter box with a uni filter..someone hacked up the lid with holes though. but I guess I should just take the lid off Quote
MinEsFasteR79 Posted May 18, 2006 Author Report Posted May 18, 2006 I forgot to mention I live in pennsylvania..an estimation of elevation would be about 200-300 feet above sea level. Quote
MinEsFasteR79 Posted May 22, 2006 Author Report Posted May 22, 2006 sorry again Bat..thanks a lot for the help..I haven't tried anything yet because..well its not to the point where I can start it yet..riding seasons started already..and im still rebuilding Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.