FMF Fatty Gold Series and Power Core II Silencers

[Justintoxicated]

So I'm finaly getting rid of them. They have nice smooth power from bottom to top but it is time to try something new...

 

These are Used FMF Fatty pipes.

 

No Dents or Cracks.

 

One pipe has a bit of rust, mostly on the under side between the exhaust port and the pipe hanger. It started a month after I bought the pipes. Pretty typical with nickle plated FMF pipes.

 

Anyways, I keep my stuff in good condition.

 

The seals are TM Designs No Leak One piece pipe colars. They use expanding silicon rings inside them. I really like these things as they have not given me any problems for several years now, and I can take the pipe apart from tthe silencer without any tools and it saves a bit of time.

 

The trick to these seals is to put some grease on the O-rings them when you slide the silencer into the pipe. I would keep them but they won't work on the pipes I'm going to get. I think I paid $60 for them new.

 

 

Looking for $350

 

I have a recent pic of them installed, and will get a pic of them as they are off the bike showing the spot on the finish soon.

 

If you look close you can see a little but of the spot in this pic.

 

 

PIPES SOLD

Edited May 31, 2006 by Justintoxicated

[badass_r6]

Is that price shipped?

[Justintoxicated]

350 + shipping.

 

Prefer Money order but would also take PP, just add 3%.

 

Zipcode is 90815 if you want to estimate shipping.

[badass_r6]

Any way you could take a closer picture of the rust? I am very interested and not trying to waste your time.

[Justintoxicated]

Any way you could take a closer picture of the rust? I am very interested and not trying to waste your time.

510807[/snapback]

 

Yea thats my plan I don't want anyone buying something and not being happy., you can tell in the pic is it not too noticable when they are cleaned up, but it is larger than in the pic, just on the underside of the pipe.

 

If one was to have them chromed or ceramiq coated they would look alot better than the nickle plating does after a short time. But functionaly they are a great pipe, I just need something that will work with the new motor better.

 

I will try to get some pics asap.

[Justintoxicated]

Same pipes off the bike (carefuly laid on ground because I was in a hurry taking these!)

Silencers

Tm Designs Clamps

Closeup of rust spot.

 

The bottom of the pipes are discolored from use, I had tried to spray some metalcast ground coat over the rust spot to stop it from spreading (since it was not in an obvious spot, but most of it came off or turned gold as you can see in the pic or fell off.

 

There is also some rust on the close up pipe under the Hanger Bracket and along the weld (guess FMF forgot to Nickle plate that part as good as the rest...)

 

Also not shown are a few marks from where the pipe springs rubbed one of the pipes.

 

Over all they are in good shape just some cosmetics, luckily in places that are not the most noticable. They are used pipes so these things just happen over time, especialy with nickle plating. But they don't look too bad installed, better than no nickle plating at all

Edited May 4, 2006 by Justintoxicated

[Justintoxicated]

Still for sale.

[Justintoxicated]

come on somone buy these, they are good shape and reasonable price and you know damn well you will get them if you by them from me.

 

If you want more pics etc pm me and they will be there.

[ellison445]

How much for the clamps?

[Hilarious]

I've have a set of those same clamps.

I like em a lot, they dont leak and are easy to install and remove.

Had em on with my fattys and they fit my cpis perfectly.

Free bump!

[Justintoxicated]

If these don't sell as a set I will consider selling the clamps seperate at a later date.

[fsubanshee]

I'd be willing to buy them from you for $350 if it included shipping to 48162

[Justintoxicated]

If no one else offers me more I will probably be able to do that I will have to figure out shipping this weekend. Might have to ship 2 seperate boxes unless you have any ideas

[ellison445]

USPS will be the cheapest.. I paid 20 to ship a set of t-5s

 

 

If no one else offers me more I will probably be able to do that I will have to figure out shipping this weekend.  Might have to ship 2 seperate boxes unless you have any ideas

514645[/snapback]

[Justintoxicated]

USPS will be the cheapest.. I paid 20 to ship a set of t-5s

514652[/snapback]

 

Thanks for the tip, did you use a single box?

 

fsubanshee, If I don't get 350 + shipping by the end of the week and you still want them reply here or send me a PM, just cleaned out some space in inbox.