banshee#1 Posted April 26, 2006 Report Share Posted April 26, 2006 hey i have a trinity carb 33mm with t-5s cool head 20cc domes, mild port work.... im at sea level and it is 60's ? wut size jets should i use Quote Link to comment Share on other sites More sharing options...
FIRST BANSHEE Posted April 27, 2006 Report Share Posted April 27, 2006 hey i have a trinity carb 33mm with t-5s cool head 20cc domes, mild port work.... im at sea level and it is 60's ? wut size jets should i use 508362[/snapback] what size do you have now? how is it running? probably 195-205 Quote Link to comment Share on other sites More sharing options...
banshee#1 Posted April 27, 2006 Author Report Share Posted April 27, 2006 idk i didnt change it wen it came to me from trinity but i think its a 165 called trinity he said he thinks 165 Quote Link to comment Share on other sites More sharing options...
FIRST BANSHEE Posted April 28, 2006 Report Share Posted April 28, 2006 I've never run the 33, but I still think with porting you'll be in the 195-205 range. It my be on the fat side, but it won't hurt the pistons and you can jet down. Quote Link to comment Share on other sites More sharing options...
Wallynut Posted April 28, 2006 Report Share Posted April 28, 2006 The 33 and 35 run pretty much the same jetting wise, like most carb situations on banshee's, there are differences in what everyone runs. I'm about the same as you for elevation and temp, I run 180 main middle clip on needle(I forget which needle I have in there now), 42 pilot. You might do well to start at 200 main and 48-50 pilot. Do WOT plug chops. This has been discussed so much that you may not get much response, so do a search. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.