fastass Posted April 3, 2006 Report Share Posted April 3, 2006 (edited) Ok so I have a banshee with 40 origianl hours everything is basically new....does not have any spark.....I just bought a new coil and still no spark???? now it comes down to stator or cdi....Heres my question I tried to bump start this machine towed on the back of my truck....the lights were coming on but the sheeeee would not start????? So does that mean that my stator is good because the lights are coming on or would they come on anyway......how do I ohm my stator and what should it read????? and how many times out of 10 would iti be the cdi???? thanks marc Edited April 3, 2006 by fastass Quote Link to comment Share on other sites More sharing options...
THEREALBUDLIGHTBANSHEE Posted April 3, 2006 Report Share Posted April 3, 2006 un hook your toro box,its a little black box mounted on the left side of frame behind radiator.then try it! Quote Link to comment Share on other sites More sharing options...
fastass Posted April 3, 2006 Author Report Share Posted April 3, 2006 I already have the tors removed!! I have the single carb conversion.....what else do u think I could try...before spending a bunch of money!!!! ] thanks Quote Link to comment Share on other sites More sharing options...
ironhead Posted April 3, 2006 Report Share Posted April 3, 2006 u could call ricky stator and find out what ohm your stator should be at ,i forget what it is. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.