Mullet Man Posted March 2, 2006 Report Posted March 2, 2006 looking for a friend of mine. something in the ~$3,000 price range. either stock or piped/filtered and jetted. hes not looking for anything that has extensive work done to it. just wanting a good running shee that isnt a basket case thanks Quote
wompasprez Posted March 3, 2006 Report Posted March 3, 2006 I got an 04 that is clean one owner, but it would be in the low $4000 range. Just thought i would see if he would be interested. Piped and jetted with extra wheels and tires...she is ready to go. Quote
jmoore Posted March 3, 2006 Report Posted March 3, 2006 There are always a few in our "cycle trader" in the twin cities area. If you can't find any I can mail you a copy or something.? Quote
unstable concepts Posted March 3, 2006 Report Posted March 3, 2006 I have a red 01 that runs perfect. Good compression on both cylinders, starts 1st or 2nd kick even in this cold weather. The only flaws are a crack in the rear plastics, a tear in the seat cover, and the tires are a bit worn. I had fullbore plastic on it but sold it and put these plastics on since the appearance never mattered much to me. Also, it has Toomey T5 pipes, an adjustable timing advance, and a K&N airfilter. I'm the 2nd owner and have had it since 2002. I'm asking $3200 and located in Plainfield, IL. Quote
Mullet Man Posted March 3, 2006 Author Report Posted March 3, 2006 thanks guys, i informed him of this thread so he will be checking in sometime. keep'em coming Twin Cities might be a little too far for what he is looking for but i'll find out. thanks fellas Quote
Eazy Posted March 6, 2006 Report Posted March 6, 2006 Im the buddy in need of a quad.. Unable-I'll take a pic of that Red shee' of yours... [email protected] Quote
holeshot2 Posted March 8, 2006 Report Posted March 8, 2006 Im the buddy in need of a quad..Unable-I'll take a pic of that Red shee' of yours... [email protected] 483031[/snapback] i have a 1998 banshee with lots of mods,it has new top end with mild port,wiesco pistons,v-force reeds,pro design intakes,34mm keihin carbs,k&n slip on filters,twist throttle,new tranny bearings,new hotrod crank,pro design adj. stator plate,billet stator cover,chrome clutch cover with billet water pump cover & billet clutch in-sert,chrome pegs,chrome a-arms,billet front bumper,new mxr holeshots front and rear with itp rims,fmf fatty pipes,billet handle bar clamp,custom painted plastic,or stock uncut plastic(blue & white) near kansas city...3500.00 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.