Mxzdan Posted February 22, 2006 Report Posted February 22, 2006 (edited) Im in Ontario and the elevation is at about 400 feet Stock Bore Pro design filter with no air box lid Stock Carbs Running 91 Octane Pump gas with yamaha lube 2r Rocket Pipes It's got 240 mains in it stock pilots and it runs good and doest really seem to bog but after reading around i dont think it's suppose to be like that so please help me figure out what I need to use or do Thanks Edited February 22, 2006 by Mxzdan Quote
Ls7colorado Posted February 22, 2006 Report Posted February 22, 2006 wow 240's??? I would have to say bump it to atleast a 300 and i would probly go to a 27.5 pilot and needle in 4th clip. have you checked your plugs? are you sure your runnin 240's? Quote
ellison445 Posted February 22, 2006 Report Posted February 22, 2006 240??????????????? You should be toast as we speak Bump that up to atleast 300 and work from there. Quote
Mxzdan Posted February 22, 2006 Author Report Posted February 22, 2006 I when to the shop and they only got 310 and only can get 30 pilot So will the 310 with 25 pilot and 4th clip work good I only run i when it more then 0 degree outside Quote
peterlocal22 Posted February 22, 2006 Report Posted February 22, 2006 i run a 310 main jet w my rockets and my bike runs mint. i live in massachusetts Quote
1.6i Posted February 23, 2006 Report Posted February 23, 2006 running 340's with t5's and dual k&n's @ sea level.. Quote
Ls7colorado Posted February 23, 2006 Report Posted February 23, 2006 even though your in canada can you order jets from the US? I got mine from http://www.vitosperformance.net/ Quote
Mxzdan Posted February 23, 2006 Author Report Posted February 23, 2006 That what Im going to do order a jet kit I should get it tommorow but i want to make sure of what I should put in it Thanks Quote
Ducman Posted February 24, 2006 Report Posted February 24, 2006 #27.5 or 30 pilot, air scew 1.5 to 2 turns out Needle 3rd or 4th clip 300 - 310 main This is what I ran with foam filter, lid off close to sea level If you get a jet kit you will pay for a lot of junk jet sizes you dont need. Quote
Wicked98Shee Posted February 24, 2006 Report Posted February 24, 2006 LOL that motor should be toast!!!! uhhh id do a plug chop cause ya gotta be lean Quote
Mxzdan Posted February 24, 2006 Author Report Posted February 24, 2006 (edited) haha I got my jet kit and there was nthing good in it 280 270 340 So I went to my dealer and bought 310 so should I still be ok with that and my stock pilot jet Edited February 24, 2006 by Mxzdan Quote
greg_banshee Posted February 24, 2006 Report Posted February 24, 2006 even though your in canada can you order jets from the US? I got mine from http://www.vitosperformance.net/ 477748[/snapback] were not isolated up here in Canada lol we are attached EH lol Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.