Need Help With Carb Hoses

[bkdamkr]

 

I have a pair of Banshee carbs with a multitude of hose attachment points, but no hoses. From what I can find on "Parts Fish", two are apparently vent hoses, which leaves three. One input is ~6mm diam smooth tube with a "knob" on the end, which is bent upward. The second is a smaller, vertical tube with ridges, which points upward from around the carb waistline. The third is another ridged nipple, though horizontal, which leads sideways out of the bottom of the bowl. When I got the carbs, these bottom nipples were linked together and another hose "T'd" off of the one joining the carbs.

 

So - where do each of these go, and what purpose do they all serve?

 

Thanks,

Brian