lilbake69 Posted February 20, 2006 Report Posted February 20, 2006 Needing help rejetting! 03 banshee stock carbs without TORS bolt on K&N's to the carbs stock pipes 4000' elevation 50-75 degrees F and also then another for 75-90 degrees just need jet sizes and needle clip position thanks -Zac Quote
wesw Posted February 20, 2006 Report Posted February 20, 2006 should be able to leave the needle in the middle try some 230 mains with that elevation. might be rich still. plug chop Quote
Banshee~ Posted February 20, 2006 Report Posted February 20, 2006 (edited) 230's should do the trick, but id bring 220's-240's just incase. EDIT: not 220-340's Edited February 21, 2006 by Banshee~ Quote
rzcolobanshee Posted February 21, 2006 Report Posted February 21, 2006 My first thought was 220 but its been a little while since i've dealt with stock pipes Quote
lilbake69 Posted February 22, 2006 Author Report Posted February 22, 2006 thanks guys the 230's kicked ass well atleast for stock pipes! Quote
BigRed350x Posted February 23, 2006 Report Posted February 23, 2006 (edited) Needing help rejetting!03 banshee stock carbs without TORS bolt on K&N's to the carbs stock pipes 4000' elevation 50-75 degrees F and also then another for 75-90 degrees just need jet sizes and needle clip position thanks -Zac 476151[/snapback] haha! high altitude... you are such a joker. Try getting it right when you ride up to 14,235ft. That's a pain in the ass. We've taken both my jeep and the banshee up this road. Highest driveable road in the continential united states. Edited February 23, 2006 by BigRed350x Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.