kazaa187 Posted February 12, 2006 Report Posted February 12, 2006 i jus took my car apart an i cleaned it out an put it back on an wen i put the gas on all it did was pour gas out the hoses wat would make it do that Quote
Capone Posted February 12, 2006 Report Posted February 12, 2006 Float height is set too high. Search the forums on how to adjust I don't got time to explain, hope it helps. Quote
suzuki0702 Posted February 12, 2006 Report Posted February 12, 2006 turn off gas let all gas drain out of bowls...turn it back on and tap bottom of carb with something...later Quote
QuAdRaCeR^775 Posted February 12, 2006 Report Posted February 12, 2006 I'm having the same problem... could someone tell me how to adjust the float height? Quote
greg_banshee Posted February 12, 2006 Report Posted February 12, 2006 your needle in the bowl of your carb is stuck, i had the same problem when i got my carbs off ebay i just put a new needle in it & that fixed the problem Quote
QuAdRaCeR^775 Posted February 12, 2006 Report Posted February 12, 2006 I don't wanna hijack this guys thread, but ive replaced the needle already and it didnt fix anything. Quote
kazaa187 Posted February 12, 2006 Author Report Posted February 12, 2006 turn off gas let all gas drain out of bowls...turn it back on and tap bottom of carb with something...later i tried this an it fixxed my problem thanks man Quote
Mijski44 Posted February 13, 2006 Report Posted February 13, 2006 Your float could be bent from when you took your carb off and fooled with it. Check to see if both plastic floats are even on each side. If they aren't just bend them back to even gently. Just a little bit of bend in that flimsy metal connecting the floats will cause the point to sit funny over the drain allowing the gas to leak. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.