BigRed350x Posted February 4, 2006 Report Posted February 4, 2006 Found this on ebay, just thought I would share for the people who have never done it before... http://www.alpinemachineservice.com/images...m_Bushings.html Quote
Gargamel Posted February 4, 2006 Report Posted February 4, 2006 I don't know if you should be turning a wrench on your own machine if you need a step by step for that I monkey could figure it out blindfolded Thats as bad as that stupid ATV show on OLN that had a step by step on how to change handlebars Quote
bansheeman1974 Posted February 4, 2006 Report Posted February 4, 2006 you never know there are some stupid ones out there,i work with a bunch of them Quote
BigRed350x Posted February 4, 2006 Author Report Posted February 4, 2006 I'm not saying I need it, but there are some people out there who have never done anything on their bikes and can use things like this. I was just being nice and posting a guide for the newbies to the work on your own shit section. Don't be an ass. That's my job around here. Quote
greg_banshee Posted February 4, 2006 Report Posted February 4, 2006 ya not saying i need it but there are people out there that just don't have the slightest clue WTF they are doing when it comes to that. nice find man Quote
Gargamel Posted February 5, 2006 Report Posted February 5, 2006 I know you don't need it Red I mean if you need a "how to" on that, you shouldn't work on your own bike. People that need a "how to" for simple stuff like this are the same people putting thier bikes together wrong and hurting themself or others. So if your looking for a "how to" for this, I recommend you take you atv to a mechanic. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.