jetting for my ported shee

[tbd]

I just wanted to see if I am in the ball park, so here goes. my mods are,

 

passion hot mx port

noss head 21cc domes

stock carbs

t-5s

v-force2 reeds

lid on the air box with a uni filter

dyna ignition stock setting

 

My current settings are 350 main, 30 pilot, toomey needle at the 3rd clip, screws are at 1.5 turns.

 

Temps around here have been 25-35 degrees, and my elevation is 1000ft. Tell me what you guys think? I'm still breaking her in, but I want to be as close as possible. TIA

[wesw]

i would raise the needle 4th or 5th clip. and put the dyna on the 2nd setting or the mid curve.

 

you will have to see how the bike acts with the needle, and do a plug chop. jim motor like fuel.

 

best of luck.

 

also remove the lid, thats one of the first things to do on any shee, and make sure you have a plate type filter.

Edited January 23, 2006 by wesw