fuel ?

[no fear zac]

Has any body tried running nitro methane in there mod. motor? If so what % did you use? Jetting(35mm)?

Thanks Zac

[enFORCER]

Well nitromethane will turn a good motor to junk real fast!!!!

But if you are going to try it, start with about 7% and go up 5 sizes on your jets.

I am asumming you are running alcohol, because nitromethane does not mix with gas. There for you will most likely be drilling your jets out.If your not running a fuel pump, then you will need to get one.

Hope you don't have a nice set of chrome pipe's. Because nitro burns so slow that it will blue your pipe's the first time you start it up.

Unless you have money to waste, then I would stay away from it....

[fastbanshee8]

You can use the Klotz nitro additive. It's actually nitro-propane, so it mixes with gas or alky.

[snowprophet1]

I played w/alky, but I've heard the same thing that enFORCER just said. Expect a lot of bad things to happen. The klotz nitro additive smells nice, but doesn't pack much punch. Klotz makes cozox which, if you mix the 1 gallon of cozox (sounded out as ko-zok) w/4 gallons of premium or race gas, you will have 5 gallons of oxogenated fuel which DOES make more hp (jet up a little for it). Ultra 94 by VP racing fuels is oxygenated also. I know those will give more HP, and I know alky will give more HP, but I can't say how much of a difference there is. Alky probably has more potential because of all it's cooling, etc. The real Nitro is wicked and makes the power, but at a price while learning.