skynoverya550 Posted January 7, 2006 Report Posted January 7, 2006 anyone run into stator problems with your big cc motors... i just had a 10 mil stroker built from p. magic. wouldnt pull third on the hill...=( craps out alot! 1st and 2nd are good. anything over that it wouldnt run worth a damn! i have 38mm carbs kehein's..ran best with 168 main jets..i tried all the way up to 175..the 175's ran way rich..172-168 range ran best. i heard big motor with ricky stators ect dont like to run. i called rudy and he told me i should try the stator first. any other suggestions... my mods are 521cc t-rex 125 rod.billet 10 mil 38mm carbs shear pipes in frames hill port, matched top case custom cut domes. ect all the goodies.. Quote
blueshee03 Posted January 7, 2006 Report Posted January 7, 2006 rudy done the motor listen to him.he builds a real ass kicking ,hard to beat motor.rudy is one of the finest engine builders out there and i'm pretty sure if you keep in contact with him he will help with any problems you have with it. Quote
skynoverya550 Posted January 12, 2006 Author Report Posted January 12, 2006 i just got my shee back from the shop. they installed the stock staor.. the guy exact word. "thats the fastest thing i ever ridden! what the hell is it?."...haha.. so i think the new stator did the trick. dont have time to ride it tonight. i noticed when he gave me back my other stator he also gave me back the pro design timing plate. should i re install that..? what do you guys with the big motors run your timing at? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.