compose2 Posted October 17, 2005 Report Share Posted October 17, 2005 is it safe to pressure wash my cases as long as my crank and tranny is removed. i am putting a stroker kit in and want the cases nice and clean for reassembly. is there any other performance mods i could take advantage of since the cases are currently split Quote Link to comment Share on other sites More sharing options...
blueshee03 Posted October 17, 2005 Report Share Posted October 17, 2005 its safe ,i pressure wash mine then i dry them good.it makes them clean to work with. Quote Link to comment Share on other sites More sharing options...
compose2 Posted October 17, 2005 Author Report Share Posted October 17, 2005 do i have to remove the shift cam and forks or can i leave them in. i have no reason to remove them otherwise Quote Link to comment Share on other sites More sharing options...
trex banshee Posted October 18, 2005 Report Share Posted October 18, 2005 no you can leave them in just blow them off mwith an air compressor like blueshee said and you should do fine. some mods you could do is getting your shift star modified and lightening your flywheel and advancing your timing. i know you can do this without splitting your case but sense you have it all apart, unless you have already done all this Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.