jgilbe20 Posted June 30, 2005 Report Posted June 30, 2005 i just installed new 28mm d slides on my shee and now it wont start any ideas? all of the tors is gone now but talked to some friends and they had no problems? Quote
BrianEb Posted June 30, 2005 Report Posted June 30, 2005 Do you have the thumb or twist throttle installed? Quote
ScrewMachine Posted June 30, 2005 Report Posted June 30, 2005 Welcome to the HQ! You mentioned the TORS, so I'm assuming this was still hooked up before you changed the carbs. Kind of a stupid question, but was the bike running before you changed 'em? Have you checked for spark? I'd start there and make sure you have fuel in the carb bowls. Only three things a motor needs to run, fuel, spark, and compression. If ya got all three, shee should start. Check it out and let us know. Quote
jgilbe20 Posted July 5, 2005 Author Report Posted July 5, 2005 thanks for the help all i did was unplug the black box on the left side of the frame and it fired right up Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.