justinklumb29 Posted June 1, 2005 Report Posted June 1, 2005 I just completly rebuild my shee. And it is almost completly back together. But tonight i got the engine all together and i just wanted to make sure there as spark, and there was none. Had the switches on all the wires are hooked up. I have not really looked at it closely yet but i have one idea of what it might be. I got an ajustbale timing plate for it and if i tighten the flywheel nut tight it will rub up against the srews that hold the wires going to the little black. Anyone got anyother ideas, or something simple i just looked over THanks Justin Quote
Wallrat Posted June 2, 2005 Report Posted June 2, 2005 I'd pull up a wiring diagram and triple check all the connections. Its pretty easy to cross up a wire and also if it was apart for awhile you may have gotten a little corrosion on the terminals. Usually unplugging and plugging back in will clear that up and make sure you get a good contact. As far as the flywheel goes...not sure exactly what you mean. Are you sure you got all the pieces together right? It definately shouldn't be rubbing anything. Quote
justinklumb29 Posted June 2, 2005 Author Report Posted June 2, 2005 It was my stator. I checked it today and it had no resistance between the white and red and white a green (not sure if they are the colors). I was gonna swap it with my brothers but couldnt get the cover over since his screws are stripped. Neways i just picked one up and it will be shipped out tommorow. As for the flywheel rubbing i dont think that the timing plate is down all the way, i will have to check that out Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.