mud91 Posted May 16, 2005 Report Posted May 16, 2005 just bought a used shee..Runs great but it bogs down on take off. If I any gear and pin the throtle is has a bogging feeling. my air adj. is turned out 1.5. Quote
wayfst Posted May 16, 2005 Report Posted May 16, 2005 turn them 1/2 turn in see if it is better or worse. Quote
mud91 Posted May 16, 2005 Author Report Posted May 16, 2005 turning it in will richen it right? Quote
05bansh Posted May 16, 2005 Report Posted May 16, 2005 Whats your mods, elevation, and what size jets are you running? Quote
sredish Posted May 16, 2005 Report Posted May 16, 2005 The air screw isn't going to make a lot of difference if it's happening when you pin it. Let us know whether it's doing it only at full throttle or from 1/2 up or what. You may need to richen the needle some and/or richen the main jet. Quote
mud91 Posted May 16, 2005 Author Report Posted May 16, 2005 It only does it on 1/4 throtle, I'm at 400 elevation, 28mm carbs, pods, cool head, 21cc domes, fmf pipes and silercers. main right now is 280 Quote
NEVER SATISFIED Posted May 16, 2005 Report Posted May 16, 2005 28MM? are they stock bored out or after market carbs .. .. 280.. hmm.. whats the pilot in there? Quote
sredish Posted May 16, 2005 Report Posted May 16, 2005 It only does it on 1/4 throtle you might need go one bigger on the pilot Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.