Quinlan Posted April 18, 2005 Report Share Posted April 18, 2005 This may sound like a stupid question to most, but here goes. I have an rz top end on my banshee, can I use banshee pistons in it or do I need to go with RZ pistons? My local dealer tells me the first oversize from stock on the rz is half a millimeter over....where the banshee is .10". Half a millimeter sounds like alot but I am far from a machinest so I don't know, half a mill and .10" may be the same Any help would be greatly appreciated so I can get this thing back together. Thanks Quote Link to comment Share on other sites More sharing options...
Nighty Posted April 18, 2005 Report Share Posted April 18, 2005 Both pistons (banshee and rz/rd) are 64.00 mm in size stock. .10" = 0.25MM .20" = 0.50MM banshee .10 oversized pistons are not always easy to get. Wiseco lists kits for banshee and rz's. I ran rz pistons in a banshee and had no issue's if you wanna be absolutly sure.. then go with rz pistons. Quote Link to comment Share on other sites More sharing options...
Quinlan Posted April 18, 2005 Author Report Share Posted April 18, 2005 Thanks for the info/reply. It's alot harder for me to get rz pistons than it is banshee ones, so i'll go with the banshee ones. Thanks again Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.