Won't pull 6th

[Guest LRDshee]

I run 15-41 gearing and my mods are in my sign. When i shift to 6 it's falling off the pipe and i have to clutch if i want keep it screaming. No probs with the other gears. Jetting seems to be a little on the rich side. Do you think that rejet will fix that? Or milling head, advance timing?

[chapmanmd]

I run 15-41 gearing and my mods are in my sign. When i shift to 6 it's  falling off the pipe and i have to clutch if i want keep it screaming. No probs with the other gears.  Jetting seems to be a little on the rich side. Do you think that rejet will fix that? Or milling head, advance timing?

354209[/snapback]

 

 

Rejet and clean your air filter(s). That should do the trick. Check your oil and plugs while youre at it.

[BdBanshee]

I run 15-41 gearing and my mods are in my sign. When i shift to 6 it's  falling off the pipe and i have to clutch if i want keep it screaming. No probs with the other gears.  Jetting seems to be a little on the rich side. Do you think that rejet will fix that? Or milling head, advance timing?

354209[/snapback]

 

Correct jetting will help, and so will advanced timing and increased compression.

[J-Madd]

What's your compression?

[Guest LRDshee]

What's your compression?

354222[/snapback]

 

I put a 01 motor (never rebuild) in the shee last summer, at 115 psi

[FIRST BANSHEE]

timing and compression will help. trinity 2-1 setup is awesome also.

[fixitrod]

Most likely to rich. Have had the same problem. What's your mods and jetting right now.

[Guest LRDshee]

Mods are in my sign, don't really now wath is the jetting now but when i checked my plugs, they were dark dark brown (mostly black)