doltz Posted March 26, 2005 Report Posted March 26, 2005 What does it take to remove & replace the rubber boot over your ball joints. I found some after market boots but not sure the method to get them to stay on properly. Thanks Quote
txblueshee Posted March 26, 2005 Report Posted March 26, 2005 I'm 95% sure that the stock ball joint/a-arm setup is welded together. So your not gonna have much luck seperating them. Mike Quote
doltz Posted March 26, 2005 Author Report Posted March 26, 2005 I'm 95% sure that the stock ball joint/a-arm setup is welded together. So your not gonna have much luck seperating them.Mike 345290[/snapback] I just want to swap the boots?????????? They are @ the chromer & he said the rubber boot might get jacked up????????? He has done them a lot of times so people must be replacing them. Quote
Tim C Posted March 26, 2005 Report Posted March 26, 2005 There is a spring clip that hold them on so it shoulded be too hard to replace. Cascade Innovations sell replacement boots for ball joints. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.