That1Guy Posted February 24, 2005 Report Posted February 24, 2005 I just completely rebuilt my Banshee from the ground up. I am having trouble getting the jetting correct with my new mods. What I've done.... trued / welded crank, bored 40 over, No airbox K&N with outerware, 2 into 1 intake with one 39mm carb, FMF pipes and silencers I will be running it at sea level in oregon any help with jetting would be great. Quote
Banchetta Posted February 25, 2005 Report Posted February 25, 2005 I just completely rebuilt my Banshee from the ground up. I am having trouble getting the jetting correct with my new mods. What I've done.... trued / welded crank, bored 40 over, No airbox K&N with outerware, 2 into 1 intake with one 39mm carb, FMF pipes and silencers I will be running it at sea level in oregon any help with jetting would be great. 329093[/snapback] I don't have a lot of experience w/ single carbs, but w/ dual carbs, larger carbs will hurt performance and are hard to jet since the efficientcy of the carb is way down due to less velocity (air speed through the carb), most people w/ your mods are running a 33mm carb for just a piped shee. and a 35mm carb for ported shees..A 39 is way too large. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.